40x50m Luxury Outdoor Exhibition Tents with Roof Top Solid Walls

Summarize:

WT exhibition tents have been widely used worldwide since 2007. All movable tents are made of aluminium alloy frame and PVC fabric tents.

Usually, 6061/T6 aluminium alloy frame is hard pressed, which is certified by National Nonferrous Metals and Electronic Material Analysis and Testing Center. Wind tests and destructive tests by professional institutions have proved that the aluminium structure is strictly in accordance with the EU quality control standards. Roof coverings and sidewalls are made of flame retardant double-layer PVC coated polyester fabrics, strictly in accordance with European standards DIN 4102B1, M2, with waterproof and anti-ultraviolet functions.

Description:

We can offer custom-sized outdoor event tents ranging in width from 3 to 60 meters. Normally, the height of the eaves (high side) is 2.5 to 3 meters. Of course, if you need it, its height can be 4 meters / 5 meters / 6 meters. This aluminum structure is designed with modular units and is 3 or 5 meters in length with an increase or decrease in spacing. Typically, the roof cover is made of 850 g/sqm of PVC fabric and the side walls are made of 850 g/sqm of PVC fabric.

In addition to general outdoor activities, the series of tents are also widely used in outdoor weddings, festivals, celebrations, sports activities and so on. In special cases, it can also be used in temporary warehouses, temporary workshops and emergency rescue.

Features:

1. Special modular design, fewer components, safe and reliable, easy to assemble and disassemble, easy to transport.

2. Hard pressed GB6061/T6 aluminium alloy has high strength and corrosion resistance after anodic oxidation treatment.

3. PVC waterproof oilcloth is durable, waterproof, easy to clean, anti-ultraviolet and flame retardant.

4. Aluminum structure can resist wind up to 100 km/h and snow up to 0.5 kn/sqm.

5. The internal space without any load-bearing pillars ensures 100% of the internal space.

6. Widely used in exhibitions, outdoor activities, temporary activities, temporary warehouses, emergency rescue and so on.

Specifications:

Optional Accessories:

WT exhibition tents are available in a variety of configurations. Their functions and uses are further expanded. Common configurations are as follows: side walls covered with transparent PVC windows, anchors, pillar boards, indoor ceiling, glass curtain wall glass doors, ABS hardware walls, transparent tents and side wall coverings, floor systems, drains, and other special tents units. 

We can also provide the following many optional related decorative accessories:

1. Transparent PVC windows

2. Glass curtain wall and glass door system

3. ABS Solid Wall System

4. Ceilings and Insiders

5. Wood Flooring System

6. Ground anchor

7, Rain Gutters